I have moved...

To: www.markkingsnorth.com

John Eaves design - top view

A shot of the saucer's panels based on John Eaves' sketch:

More progress on the Eaves ship.

Some rough clay renders of my progress on John Eaves' starship design:

John Eaves' concept ship "B" in progress

I have done some work to realise a design concept John Eaves posted here on his blog:

Fascinated by the second ship's ability to separate but at the same time maintain it's lines, I've started to put some work into realising this in a 3D model.  Here is my progress so far:

Still some work to do, or course: mainly panelling on the secondary hull, the windows, the texturing, and some tweaking to the shape.  Though it's getting there in between other commitments :)

In production: Mothership concept

For some time last year I was working on a project for Sonnett Realm Productions, where I was tasked with realising the concept and animation of some invading saucer-like motherships.  The concept was meant to very much reflect the genre of the piece.

Whilst the project is on ice, here are some test animations and images with some annotation:

Shot 1

First off, a simple shot of the saucer emerging from some clouds.  The pulsing center was inspired by the saucer seen in Cocoon, but there are of course a lot of Independence Day references to the design.  The main direction was that the mothership had to be black.  At first the blue glow started off being much brighter than it is here, and the initial pass showed all of the ship in frame.  However, to portray a sense of scale more, the camera was brought closer and only the central part of the ship is seen.

The brief part that shows the saucer coming out of the cloud was actually the hardest here, believe it or not.  I faded flat 2D layers of cloud in post production to get the effect, which cut down on the render time of an actual CG cloud.

Shot 2

The shots increased in complexity at this point - the brief was to show a set of saucers descending on a city.  The concept storyboard sent to me indicated a hazy-sunset type effect which I attempted to recreate in the scene here.  The city is a still stock photo of night time New York, with subtle noise effects added to the windows and streetlights to give the impression of a living, moving metropolis.  Noise effects were also added to the still photo of the lake to give the impression it was noise.  The motherships were then rendered in to the scene and then a solid colour was laid over the entire shot to blend all the elements in together.

Shot 3

This is my most favorite - and complicated - of the shots I put together. The camera pulls out from the edge of the saucer, showing the true origins of the invaders, and pulls far out to show multiple ships devastating the land.

The complication came not only from the pullback of the camera which involved some fine control, but also from the many elements overlayed on the shot: the still background photo of the landscape had to be wrapped correctly, and the expanding mushroom cloud shot had to be synced with the moving landscape. The mushroom cloud was again a still image with distortion effects added to it.

Then the laser effects were overlayed on top of this, with lots of glow added in post production. The small fighter you see getting obliterated here was added last, where the exploding debris had to also be synced with the laser beam it hits. You can see the low poly mesh of the fighter in one of the still shots at the bottom of this post.

Shot 4

Finally for now, there is shot 4 - which is a much simpler shot, although it took longer to render because of the reflections involved in the skyscrapers. The main brief was that the saucer descends/rolls into shot from the point of view of an onlooker. After doing this shot, I noticed that the V remake had a very similar shot in the daytime. Again the whole effect is very reminiscent of Independence Day to keep the genre recognizable.

Finally, this animation shows the very first test shot I put together:

Below are some stills of the mothership I did before doing the shots above:

Unfinished projects: Andrew Probert's design

Whilst doing some work for www.stphoenix.com, the producers asked me to start on a 3D model based on some sketches that the famous Andrew Probert had done for them:

Although the need for the design didn't materialize, I thought I'd post my very early work on the model here, even if it's just for the fact that it was from Probert himself:

I think this sleek and slender design showed promise, so perhaps I'll find time to progress it further.

Hawking Class starship progress

Some progress, at last! Having devoted my time in recent months to Wedding arrangements and designing invites, I got round to adding some textures today to the Hawking Class I posted up at the turn of the year.

Note I am still thinking of adding a bridge...but perhaps the engineers finally realised that they shouldn't put the command center at one of the more vulnerable parts of a vessel?

Farragut Station

An attempt to make more use of Photoshop, the only 3D here is the station. I'm quite inspired by the work of artists such as Andree Wallin who seem to work almost exclusively in the 2D realm, although I'm a little far off his work yet ;)

First Step Remastered

A re-done version of an old image, as the model underwent a re-texturing job after this.

Insignia Class Top View

A rendering of the ship from the top, with some LCARS-like framing as someone mentioned they wanted a better shot of this on deviantart.

Insignia Class nebulae shot

An image I did today, seeing as I haven't made much use of this ship...

Wintery photoshop expedition

This is the first (ever) image I've entirely done in photoshop. Due to the "severe" weather conditions over here in England, my fiance kept badgering me for a starship in the snow - so here we are...She also named it after a boat she used to have as a child, the U.S.S. Kirrin.

Insignia/Ascension class size comparison

To answer a question that is frequently asked about these two ships, I've done a scaled sized comparison chart to show the relative sizes - the Insignia Class is 560 meters in length and
the Ascension Class is 1400 meters in length...

New Year, New ship

Here are some preliminary renders of a ship I've been working on in between cooking too much Turkey and singing Old Lang Syne: A ship provisionally billed as the Hawkings Class because, well, that's just what came to mind.

A little reminiscent of the Sovereign and Interpid classes, I am more using the design to test the faster creation of models and to keep the poly count down. Currently I'm not too happy with the panels and the stardrive section needs windows along with lots of other detail, but from these pics you can get an early impression:

Sulaco type ship mock up

I mocked this up the other day as an Aliens Sulaco-type vessel. Thanks to it's angular nature it didn't take long, so I'm going to just do a little modelling tidy up and then move on to texturing it.